LED Wall Proposal
Elevation
Plan
Equipment
Power & weight
Created with ledwall.app
3D viewDrag to orbit · Right or Shift-drag to pan · Scroll to zoom
LED Wall Summary
Elevation
Plan
Created with ledwall.app
Content Delivery Guide
Pixel map
Elevation · unrolled
Plan
Test your file on this wall
Scan to open the 3D sandbox
Scan to open the 3D sandbox
Created with ledwall.app
Rigging Plot
Plan · pick points
Points
Truss required
Weight
REFERENCE ONLY · NOT AN ENGINEERED DRAWING. Loads are estimates from example truss data and may not apply to other manufacturers and models. A qualified rigger or engineer must verify every point, the venue structure and all hardware before anything is flown.
Created with ledwall.app
Ground Support Detail
Ground support ·
Ballast · suggested
Created with ledwall.app
SHEET: LED Detail ·
PROJECT:
PRODUCTION DESIGNER:
PRODUCTION MANAGEMENT:
ACCOUNT EXECUTIVE:
SHOW DATE:
CONDITIONS OF USE · ROE GROUND SUPPORT
NOTE: The values indicated below are calculated based on a structural report (19527-ROE-Stacking-Universal-GT-System-REV02_20-09-2022.pdf), but these values do not represent a structural report on its own! Please contact ROE Visual if you need access to the structural report, or have any questions regarding these results.
Conditions of Use:
-Indoor use only.
-Allowable horizontal load 0.125 kN/m2 (2.56 Psf) up to 400cm (13.12ft) height, 0.063kN/m2 (1.28Psf) above 400cm (13.12ft).
-Within a complete screen the LED panels need a rear bridge connector every 1m or 1.2m of panels, including the top panel.
-100 and 120cm wide panels need a rear truss on each column.
-LED screens that are only 2 panels wide need 2 rear support trusses and bases.
-The first and the last column in a screen always needs to be connected to a stacking system. When an extra stacking system is added for this reason, the ballast can be distributed evenly over this extra system and its neighbour.
-Above 400cm height the rear truss needs extra lateral support. (Please consult the manual first.)
-Ballast is placed on the exact positions as indicated by the letters, render and image.
Reference drawing only. Not an engineered, structural or electrical document. Verify all dimensions, loads and power on site before use.
Created with ledwall.app
SCALE
Walls
Equipment
Power and data
SHEET: Project plan
PROJECT:
PRODUCTION DESIGNER:
PRODUCTION MANAGEMENT:
ACCOUNT EXECUTIVE:
SHOW DATE:
SCALE
SHEET: Spotting plan
PROJECT:
PRODUCTION DESIGNER:
PRODUCTION MANAGEMENT:
ACCOUNT EXECUTIVE:
SHOW DATE:
X and Y from the datum. Each view's scale is under its title. Reference drawing only; verify on site.
SCALE
